Pictures were selected from this blog to make a set of instructions for the website Instructables.com.
New text was written and a fault was seen on the schematic on the old power
supply which was a USB cable. The cable had been replaced with a barrel power
plug so the schematic was changed in a graphic editor to reflect that update. Instead of publishing the Instructable immediately the featured page was monitored to gauge when a moderator was watching who appreciated technology projects. This may have helped with the fast featuring.
All To Do items have been finished so this project has been COMPLETED. In the future a simple method of wearing this device may be constructed but the purpose was to publish something completely untethered by the same things which were prominent in other projects of this nature so future users would see this as a component rather than something to be copied verbatim.
Files for Self Contained Haptic Distance Sensor:
The OpenSCAD files below are not necessary unless you want to change something
The rest of the posts for this project have been arranged by date.
Completed projects from year 1.
Completed projects from year 2.
Updated schematic
All To Do items have been finished so this project has been COMPLETED. In the future a simple method of wearing this device may be constructed but the purpose was to publish something completely untethered by the same things which were prominent in other projects of this nature so future users would see this as a component rather than something to be copied verbatim.
Files for Self Contained Haptic Distance Sensor:
The OpenSCAD files below are not necessary unless you want to change something
- OpenSCAD code. Download all files below
- Enclosure. Open this one
- Distance sensor footprint Support file
- Screw wing Support file
- Servo Horn Base Support file
- S symbol Optional
Write instructions
The rest of the posts for this project have been arranged by date.
Completed projects from year 1.
Completed projects from year 2.
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All
information in this blog, or linked by this blog, are not to be taken
as advice or solicitation. Anyone attempting to replicate, in whole or
in part, is responsible for the outcome and procedure. Any loss of
functionality, money, property or similar, is the responsibility of
those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes
the intellectual property of Brian McEvoy. Any information contained
within these messages may be distributed or retained at the discretion
of Brian McEvoy. Any email sent to this address, or any email account
owned by Brian McEvoy, cannot be used to claim property or assets.
Comments
to the blog may be utilized or erased at the discretion of the owner.
No one posting may claim claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2015-04-08 (Th)
2015-04-08 (Th)
Comments
Post a Comment