My brace fit, but it sat in the wrong place. I decided to hold my idea of the futuristic gauntlet and get the power-transmitting coil working and wearable. I intended to loop elastic straps through the plastic on both sides of my forearm, but I added a couple of stretchy straps and some buckles. The buckles and tighteners were also from the dollar store, and I salvaged them from cat collars.
I made some assumptions about how well ordinary enamel-coated wire would function and measured enough for five loops that fit on the plastic. Five circles at this diameter are the same as the commercial version that came with my lights. I held everything in place with spiral wrap and glued the exposed areas with E6000 adhesive. It'll be slow going to stick all the wire down.
Glue on the electrical coil
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2022-07-09
I made some assumptions about how well ordinary enamel-coated wire would function and measured enough for five loops that fit on the plastic. Five circles at this diameter are the same as the commercial version that came with my lights. I held everything in place with spiral wrap and glued the exposed areas with E6000 adhesive. It'll be slow going to stick all the wire down.
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2022-07-09
Comments
Post a Comment