On 2015-05-07 (Th) plastic was cut and drilled for mounting bottles. This was posted out of order and didn't describe the process for creating the shapes. That will be done now.
Cutouts were drafted for making bottle holders out of plastic sheets. 1/4" polycarbonate was in stock and should be thin enough for attaching bottles. The paper cutouts were trimmed with scissors and the centers of the holes were punched out with a hole punch. Center marks on the circles were not long enough to extend beyond the hole punch circle so they were extended with a ruler and pen. Once the paper cutouts were prepared they were positioned on the polycarbonate sheet and traced so it could be cut. Unfortunately the drafting file was lost.
To do:
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1.
Completed projects from year 2.
Cutouts were drafted for making bottle holders out of plastic sheets. 1/4" polycarbonate was in stock and should be thin enough for attaching bottles. The paper cutouts were trimmed with scissors and the centers of the holes were punched out with a hole punch. Center marks on the circles were not long enough to extend beyond the hole punch circle so they were extended with a ruler and pen. Once the paper cutouts were prepared they were positioned on the polycarbonate sheet and traced so it could be cut. Unfortunately the drafting file was lost.
Paper drafts and plastic
Paper cutouts for bottle holders
To do:
- Cut and drill bottle holders
- Get two liter bottles
- Construct wind turbines
- Move on to testing
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1.
Completed projects from year 2.
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All
information in this blog, or linked by this blog, are not to be taken
as advice or solicitation. Anyone attempting to replicate, in whole or
in part, is responsible for the outcome and procedure. Any loss of
functionality, money, property or similar, is the responsibility of
those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes
the intellectual property of Brian McEvoy. Any information contained
within these messages may be distributed or retained at the discretion
of Brian McEvoy. Any email sent to this address, or any email account
owned by Brian McEvoy, cannot be used to claim property or assets.
Comments
to the blog may be utilized or erased at the discretion of the owner.
No one posting may claim claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2015-04-26 (Su)
2015-04-26 (Su)
Comments
Post a Comment