An enclosure for the electronics was necessary and the parametric enclosure by ffleurey wouldn't print. Inability to print was likely due to a series of problems with the printer and software rather than ffleurey's model. Another parametric enclosure was modeled for this project but doesn't feature the rounded edges and beveled corners seen in ffleurey's model. Lid mounts were semicircles which printed without the need for supporting material.
Downloadable Files:
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1.
Completed projects from year 2.
Rotation of enclosure for keyboard electronics
Adjustable height
Adjustable length
Adjustable screw size
Adjustable wall thickness
Adjustable width
Downloadable Files:
- Common OpenSCAD files
- Servo footprints for OpenSCAD.
- Wrist Mounted Chording Keyboard. All STL printing Files. If you want to print.
- Parts for index, middle, and ring fingers.
- Parts for pinky finger.
- Thumbboard.
- Servo lever.
- Wrist base.
- Left-handed Wrist Mounted Chording Keyboard. All STL printing Files. If you want to print.
- Parts for index, middle, and ring fingers.
- Parts for pinky finger.
- Thumbboard.
- The servo lever and wrist base are the same as the right-handed version
- Wrist Mounted Chording Keyboard. All OpensCAD Files. If you want to make changes.
- Parts for index, middle, and ring fingers.
- Parts for pinky finger.
- Thumbboard.
- Servo lever.
- Wrist base.
- Arduino Code for wired keyboard
- Spreadsheet for chords.
- Wrist mount
- Revise offset levers
- Make holes in thumb board cylindrical instead of countersunk
- Add limit switch mounts
- Connect servo arms
- Lengthen servo arms
- Integrate:
- Controller
- High precision potentiometers for tuning servos
- Servos
- Enclosure for each controller
- Limit switches
- Activation switch
- Debug
- Test
- Refine
- Repeat
- Activation switch
- Route wires
- Write instructions
- Compress and link to all files
- OpenSCAD files
- STL models
- Arduino code
- Make diagram with everything labeled
- Schematic
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1.
Completed projects from year 2.
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All
information in this blog, or linked by this blog, are not to be taken
as advice or solicitation. Anyone attempting to replicate, in whole or
in part, is responsible for the outcome and procedure. Any loss of
functionality, money, property or similar, is the responsibility of
those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes
the intellectual property of Brian McEvoy. Any information contained
within these messages may be distributed or retained at the discretion
of Brian McEvoy. Any email sent to this address, or any email account
owned by Brian McEvoy, cannot be used to claim property or assets.
Comments
to the blog may be utilized or erased at the discretion of the owner.
No one posting may claim claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2015-09-09 (W)
Comments
Post a Comment