Most of the week was spent on the acetone vapor project. Testing was completed with excellent findings! A foolproof method was found and a relatively quick method was also found but it required more supervision. Good looking video showed what the process looked like in time-lapse, see below. An Instructable was published and featured! People on Instructables commented with even faster methods to process parts but I really like my method which didn't require any special parts or heating elements.
Thursday saw the return of the compass. The last time I did anything with the compass was right before I took off for CES in Las Vegas. Right before I left I made a new spinner design. It was smaller than the previous design but it needed a new base. So I made one. Due to the small size I could use the escutcheon pins as the post without needing to cut them. This design also used shortened nails to the sides of the post instead of a post which was modeled in software.
The rest of the weekly summaries have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
Time-lapse video of parts processing
Animated image showing the results of the processed parts
Cover image for my Instructable
Thursday saw the return of the compass. The last time I did anything with the compass was right before I took off for CES in Las Vegas. Right before I left I made a new spinner design. It was smaller than the previous design but it needed a new base. So I made one. Due to the small size I could use the escutcheon pins as the post without needing to cut them. This design also used shortened nails to the sides of the post instead of a post which was modeled in software.
Sketch of base design
Print of base design
The rest of the weekly summaries have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
Comments
Post a Comment