A helpful hacker saw my project and asked about the LEDs going into the project. It was a cluster of seven from an Adafruit Jewel but he happened to have some single 8mm addressable LEDs, one of which even had Dupont wires soldered to it so there was no more need to solder anything. This was a temporary solution until I can get my stock of addressable LEDs at home.
Previously, the onboard LED would flash to indicate the mode of the keyboard, but that used the delay() function which halted all other processes on the keyboard. By removing that, and using only the color changing LED, modes could be switched instantly and typing could continue immediately. After the pictures were taken, the brightness of the LED was reduced.
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2018-04-28
Previously, the onboard LED would flash to indicate the mode of the keyboard, but that used the delay() function which halted all other processes on the keyboard. By removing that, and using only the color changing LED, modes could be switched instantly and typing could continue immediately. After the pictures were taken, the brightness of the LED was reduced.
Changing modes with color
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2018-04-28
Comments
Post a Comment