I tested all of the hardware one way or another. The programming I was doing was only for the sake of proving they could work together, not to make a finished product. My next step for the badge will be to devise a circuit for all the components and make a PCB. At the center will be the ESP-WROOM-32 module, so I created a pin assignment list.
On top of the modules I've connected, I plan to have a basic LED for diagnostic purposes, a potentiometer to help with programming, and six digital inputs arranged like a 4-way joystick and a couple of buttons, ala old-school Game Boy style. The joystick arrangement will be topped by a cap on a standoff to act like a gamepad. It could be left off to save installation and printing time, and the buttons would still work.
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2020-01-18
Current pin assignments
On top of the modules I've connected, I plan to have a basic LED for diagnostic purposes, a potentiometer to help with programming, and six digital inputs arranged like a 4-way joystick and a couple of buttons, ala old-school Game Boy style. The joystick arrangement will be topped by a cap on a standoff to act like a gamepad. It could be left off to save installation and printing time, and the buttons would still work.
Digital joystick concept
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2020-01-18
Comments
Post a Comment