Yesterday, I made a 2D layout for the panel I am modeling today. After sketching in CAD, I found and fixed an arrangement issue, but I thought I would have more use of the drawing. Instead, I did all of the 3D modeling with only a few glances at the layout.
The layout puts all the parts on a single plane to improve the Bluetooth reception by uncovering the antenna. Each element has a recess made to the size of the component. My printer was too small to print it with the tolerances I wanted, so I had to thin the borders a bit. I may have to thicken the bottom for support or make the rest of the enclosure in parts.
The rest of the posts for this project have been arranged by date.
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
The layout puts all the parts on a single plane to improve the Bluetooth reception by uncovering the antenna. Each element has a recess made to the size of the component. My printer was too small to print it with the tolerances I wanted, so I had to thin the borders a bit. I may have to thicken the bottom for support or make the rest of the enclosure in parts.
Rendered model with thin walls
GitHub repo for Cardinal, aka InCompass
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2020-07-20
2020-07-20
Comments
Post a Comment