I discovered that my plans to change the threshold alert voltage from 3.0V to 3.1V were not going to happen because it was already set to 4.0V. I wanted to increase it because I didn't have long between when my battery was low and when it would expire. Since I've added a larger unit, I'll try it for a bit before making any program changes.
There were still issues with program malfunctions, and they caused the vibrating motor to get stuck on, so I wanted to add a small switch to disable everything. I found a little unit, but I had to straighten two of the 90° pins, clip off a third, and remove a mounting bracket. Once the mods were complete, I added it to the circuit, and it worked. I flashed the most recent code, and the system resumed working.
The rest of the posts for this project have been arranged by date.
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2020-10-03
There were still issues with program malfunctions, and they caused the vibrating motor to get stuck on, so I wanted to add a small switch to disable everything. I found a little unit, but I had to straighten two of the 90° pins, clip off a third, and remove a mounting bracket. Once the mods were complete, I added it to the circuit, and it worked. I flashed the most recent code, and the system resumed working.
Power switch
The rest of the posts for this project have been arranged by date.
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2020-10-03
Comments
Post a Comment