2021-05-12 (W) Wearable Macro Keyboard BackOfTheHand BotH First Aerial Assembly

Getting the correct measurements for my aerial was a big step. Wiring one was another ordeal. I bought some tiny three-conductor cable and installed it, but it was so fragile I didn't want to rely on it for a prototype. I used some 26AWG wire that I probably salvaged from an old ethernet cord. Routing all the copper through the vertical bar kept things neat, but it was tricky to push the wires through. A square hole should make it easier.

Wired IR aerial

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2021-05-11