I wanted to figure out why my infrared LEDs were not activating. I checked my initialization code, where I tell the microcontroller how to treat each pin. The auxiliary switches were not declared, so I added them, but my LED outputs were accurate. When I went back to the switching code, I realized I was focusing on the wrong pair of lights, so I corrected the mistake.
The following test lit the LEDs, and I saw lots of activity on the receiver. I tried to block the infrared light with my finger and some metallic foil, but there were still significant values. A television remote didn't seem to affect it, but when I pointed my IR camera at the receiver, it drowned out the signal completely. Essentially, I used the spotlight as an IR jammer.
LED emissions and code feedback
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2021-05-19
The following test lit the LEDs, and I saw lots of activity on the receiver. I tried to block the infrared light with my finger and some metallic foil, but there were still significant values. A television remote didn't seem to affect it, but when I pointed my IR camera at the receiver, it drowned out the signal completely. Essentially, I used the spotlight as an IR jammer.
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2021-05-19
Comments
Post a Comment