This project is effectively complete. I have another idea about new layers, but the code is all set to program them without much fuss. The last component I wanted to add was a cover to keep the electronics protected. The mounting holes were already in place, and I had an idea of how it would wrap around the board holder and sit on top of the keyswitches.
My ambition toward this project has fallen sharply since it is almost complete. I think I wrote some of my sloppiest code when I made the cover, but according to the model, it should all fit. The body has a couple of screw-sized holes, which will allow a bolt to come from below and hold it on top. The hollow shape should hide all the wires and exposed components. I worry that it may be too flimsy with only two bolts.
Violet cover on rendering
Isolated cover
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2021-07-15
My ambition toward this project has fallen sharply since it is almost complete. I think I wrote some of my sloppiest code when I made the cover, but according to the model, it should all fit. The body has a couple of screw-sized holes, which will allow a bolt to come from below and hold it on top. The hollow shape should hide all the wires and exposed components. I worry that it may be too flimsy with only two bolts.
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2021-07-15
Comments
Post a Comment