2021-10-20 (W) EWC_Panel Button array prepping

Assembling the posts and discs was a finicky procedure. I tried dipping a toothpick into my resin vat and letting the liquid fall onto my model, but the watery fluid was too difficult to control. My partner gave me a bottle with an eyedropper built into the lid, and I filled it with resin then wrapped it in aluminum tape to keep out light. While assembling, I was short some parts, so I exported the posts and discs from my model and arranged a bunch in my printer program. Luckily, the printer made the parts in less than an hour.

Button array assemblies

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2021-10-