I wanted a headphone hanger, but they seemed overpriced for a hook. Some integrated USB hubs or sound cards, but I didn't want those features. I designed one for the laser cutter so I could learn about making 3D shapes.
Pieces in QCAD
The design uses M3 nuts and bolts to hold two faces together and some cross-braces that tighten against each other with more bolts. The central support uses a 1/4" bolt that will attach to the underside of my desk.
Assembly required
The dome screwed into my desk is from a security camera mount I scavenged because it used to have an articulated arm. I used three short wood screws to attach it.
Installed
I didn't need the M3 bolts to hold everything together since the tension of the wood held it all snuggly. The biggest mistake was trusting the published measurements on my wood, which claimed 1.5 mm, but was a bit thicker and made assembly more difficult.
Doing its job
GitHub link for 24EngHeadphoneHolder
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2022-08-07
The design uses M3 nuts and bolts to hold two faces together and some cross-braces that tighten against each other with more bolts. The central support uses a 1/4" bolt that will attach to the underside of my desk.
The dome screwed into my desk is from a security camera mount I scavenged because it used to have an articulated arm. I used three short wood screws to attach it.
I didn't need the M3 bolts to hold everything together since the tension of the wood held it all snuggly. The biggest mistake was trusting the published measurements on my wood, which claimed 1.5 mm, but was a bit thicker and made assembly more difficult.
GitHub link for 24EngHeadphoneHolder
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2022-08-07
Comments
Post a Comment