I bought an electric precision screwdriver since I deal with many tiny screws professionally and in my hobbies. I was disappointed that my purchase didn't come with any carrying case other than a cardboard box. I designed a holder that I could cut on a laser in four pieces and hold together with M3 bolts. I accomplished the spacing between layers with layered nuts. My idea had room for many more bits than came with the screwdriver, so I added another set I had floating around.
Holds so many bits
The lid sticks to the bottom through four magnets mounted at the corner, and they're attracted to nuts on the other side which turned out to be a poor idea since the magnets don't hold well enough, and I wouldn't trust it in a backpack. Fortunately, there is room in my tool chest where it shouldn't get turned on its side.
Laser-cut wooden case
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2022-09-30
The lid sticks to the bottom through four magnets mounted at the corner, and they're attracted to nuts on the other side which turned out to be a poor idea since the magnets don't hold well enough, and I wouldn't trust it in a backpack. Fortunately, there is room in my tool chest where it shouldn't get turned on its side.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2022-09-30
Comments
Post a Comment