My fiancé went through my badge assembly instructions to give feedback. She assembled one unit but needed clarification. Her input will help me make a better manual.
I made the changes to my instructions. Most of the wording was all right, but I had to take a couple of new pictures regarding how to connect wires. During Grindfest, I should make an assembly video.
I started converting my scribbles into Speaker Notes, but it was more complex than I hoped. There is a lot more content and more to add.
I received a Proxmark3 RDV4 for my birthday and set it up. The process was painfully frustrating, and the community was toxic. I would only recommend this product if they had someone to guide them through the setup and their first reads. Once it worked, I cloned my apartment's entry fob to a blank one and the RFID implant in my right hand.
The drive to Grindfest 9 was pleasant. My fiancé and I discussed what we wanted to see and do, then listened to an audiobook. Part of her day was rearranging the schedule as people made last-minute changes.
I helped get Grindfest 9 ready to start, and I also found someone willing to teach me about drone flying. I chipped two propeller blades and forgot to hit record before my flyby of the house, which would have looked pretty cool.
The rest of the summary posts have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
 |
| Revisions |
I made the changes to my instructions. Most of the wording was all right, but I had to take a couple of new pictures regarding how to connect wires. During Grindfest, I should make an assembly video.
 |
| Badge assembly instructions REV2 |
I started converting my scribbles into Speaker Notes, but it was more complex than I hoped. There is a lot more content and more to add.
 |
| Notes in a text document over the slide |
I received a Proxmark3 RDV4 for my birthday and set it up. The process was painfully frustrating, and the community was toxic. I would only recommend this product if they had someone to guide them through the setup and their first reads. Once it worked, I cloned my apartment's entry fob to a blank one and the RFID implant in my right hand.
 |
| Apartment key fob, 125Khz antenna, blank fob, and Proxmark3 RDV4 |
The drive to Grindfest 9 was pleasant. My fiancé and I discussed what we wanted to see and do, then listened to an audiobook. Part of her day was rearranging the schedule as people made last-minute changes.
 |
| Trip map |
I helped get Grindfest 9 ready to start, and I also found someone willing to teach me about drone flying. I chipped two propeller blades and forgot to hit record before my flyby of the house, which would have looked pretty cool.
 |
| Least exciting drone photo |
The rest of the summary posts have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
Comments
Post a Comment