I revised the exterior cage to be narrower and taller and revised the hole pattern in the bottom for M3 bolts. I printed two copies at different heights, but the shorter version failed.
I ordered a couple of brass machine screw sizes, and the shorter version arrived first, but they were not long enough to reach from the bottom. I cut a length of nylon standoff to be a coupling nut and shortened two brass bolts to make an adjustable height stub under the magnet spinner. The compass should have worked well, but I got extraneous feedback constantly. I tried switching the interior cage, but my spinner would not operate smoothly. I may have to redesign and add metal parts to reduce friction.
GitHub files for GrinderCompass
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2024-06-25
I ordered a couple of brass machine screw sizes, and the shorter version arrived first, but they were not long enough to reach from the bottom. I cut a length of nylon standoff to be a coupling nut and shortened two brass bolts to make an adjustable height stub under the magnet spinner. The compass should have worked well, but I got extraneous feedback constantly. I tried switching the interior cage, but my spinner would not operate smoothly. I may have to redesign and add metal parts to reduce friction.
 |
| Trimmed hardware and REV10 exterior cage |
GitHub files for GrinderCompass
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2024-06-25
Comments
Post a Comment